TOP 10 Best Table Saws

#1
DEWALT Table Saw for Jobsite, Compact, 8-1/4-Inch (DWE7485)
  • Portability: Compact size for ease of transportation and storage
  • Easy adjustments: Rack and pinion telescoping fence rails make fence adjustments fast, smooth and accurate
  • Variety of cuts: 24.5 inches of rip capacity for ripping 4x8 plywood or OSB sheets
  • Power: 15 Amp, 5800 rpm motor
  • Onboard storage: Onboard storage provides easy access to the site pro guarding components and push stick when not in use
  • Guaranteed tough: Metal roll cage ensures job site durability
#2
SKIL 15 Amp 10 Inch Table Saw - TS6307-00
  • RACK AND PINION FENCE RAILS – Ensures fence stays parallel to blade for fast, smooth, and accurate cuts
  • INTEGRATED FOLDING STAND – Legs quickly fold in to provide portability and convenient storage
  • PARALLEL BLADE ALIGNMENT – Available micro-adjustment of blade so that it is parallel to rip fence and miter slot
  • 4x4 CUTTING CAPACITY – Cuts material up to 4x4 at 90 degrees
  • 2-47° BEVEL CAPACITY – Cuts between 2 positive stops at 0 and 45 degrees with quick release lever
  • DUST PORT ELBOW – Redirects dust to a container for easy cleanup
#3
Rockwell BladeRunner X2 Portable Tabletop Saw with Steel Rip Fence, Miter Gauge, and 7 Accessories – RK7323
  • [SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle
  • [CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts
  • [TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile, plastic, aluminum, and metal
  • [0-60° MITER CUTS] With the adjustable gauge you can pull off precise miter cuts for a whole assortment of woodworking projects
  • [ON-BOARD ACCESSORY STORAGE] When the miter gauge, rip fence, and extra blades aren’t in use they can be conveniently housed in the base of the saw
  • [SAFETY SWITCH] Prevents accidental starting, plus the vacuum port lets you hook up a shop vac that cleans while you cut
#4
BOSCH 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand 4100XC-10
  • Powerful table saw has 15-Amp saw with 4.0 max HP and 3,650 rpm, for rip-cutting and cross cutting of fine and rough materials
  • Dimensions: 32.5" D x 27" L x 13" H, Product weight: 94 lb
  • Soft-start circuitry – manages intensity of motor start-up and minimizes the likelihood possibility of tripping a circuit breaker
  • Constant Response circuitry: Helps maintain speed under load
  • Restart protection: Helps to avoid accidental startup
  • Portability: Works seamlessly with the included lighter GTA47W Gravity-Rise Wheeled Stand for easy jobsite mobility, with single-action setup and take down
  • Smart Guard System: Riving knife and anti-kickback pawls provide protection, while the guard assembly provides a barrier to help prevent blade contact while allowing an unobstructed view of the cut
#5
Fulton Safety Woodworking Push Block and Push Stick Package 5 Piece Set In Safety Orange Color, Ideal for Woodworkers and Use On Table Saws, Router Tables, Jointers and Band Saws
  • This 5 piece safety kit is designed to be your essential safety protection to help from getting to close to the cutters or blades on a router table, shaper, band saw, table saw and jointer. From the narrow v-style push stick, to the beefy long push block, this kit has all the bases covered in regards to many different woodworking applications.
  • Each device in this kit is intentionally made in the SAFETY ORANGE color for high visibility when in use. This provides the user the ability to see exactly there hands are at during the cutting or milling process. Being SAFETY ORANGE also allows for you to easily find the device when its not in its normal location.
  • The general idea behind these safety devices is to help you guide and control your stock when feeding through a table saw, band saw, jointer or a router table. The push blocks are generally used on jointers and some router applications, while the push sticks are primarily used on table saw projects. All five devices help prevent kickback and protect your fingers and hands during your cutting process
  • Soft, receptive, rubber foam pads line the bases of the two small push blocks and the large push block. The rubber soles make pushing and controlling your stock much easier and safer then when doing it by hand. The soles are also washable with with warm water. Must let the rubber soles dry for 24 hours prior to using them again.
  • The 5 piece safety kit includes 2 each small push blocks (1 angled handle and 1 offset handle small push block), 1 each long or large push block, 1 each standard width push stick and 1 narrow width safety-v push stick.
#6
Metabo HPT 10-Inch Compound Miter Saw, Single Bevel, 15-Amp Motor, 0-52° Miter Angle Range, 0-45° Bevel Range, Large Table, 10" 24T TCT Miter Saw Blade (C10FCGS)
  • 10" Compound Miter Saw
  • MOTOR: 15 Amp motor delivers high power for the toughest of cuts generating a no-load speed of up to 5,000 RPM
  • LIGHTWEIGHT: Only 24.2 lbs. to facilitate maneuverability and portability
  • MITER ANGLE RANGE: 0-52 degrees, to the right and left for increased flexibility
  • BEVEL RANGE: 0-45 degrees, to the left with adjustable bevel stops for precision cuts
  • LARGE TABLE: Offers better material support with vice clamping system to secure work piece
  • THUMB ACTUATED POSITIVE STOPS: For quick miter adjustments
  • HORIZONTAL HANDLE: For a secure hold
#7
DEWALT 12-Inch Miter Saw, 15-Amp, Single Bevel, Compound (DWS715)
  • Power and durability: 15 amp, 4,000 Rpm motor
  • Miter detent plate improves productivity and ensures cutting accuracy: Adjustable stainless steel miter detent plate with 14 positive stops
  • Miter dentent override that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the Miter detents. Arbor size is 5/8 inches
  • Tall sliding fences that support crown molding up to 5 1/4 inch nested and base molding up to 6 1/2 inch vertically against the fence while easily sliding out of the way for bevel cuts
  • Cross cut capacity up to 2x8 inch dimensional lumber at 90° and a 2x6 inch dimensional lumber at 45°
  • Machined base fence support maintains fence perpendicularity with blade for cutting accuracy
  • Bevels to the left up to 48° and to the right up to 3°, with positive stops at 0°, 45° and 33.9° for cutting crown molding laying flat with 4 hardened steel bevel stops at 0°, 33.9°, 45° and 48° that delivers versatility at most common bevel angles
  • Includes a carbide blade, dust bag, blade wrench, vertical clamp and comfortable side handles in the base
#8
Table Saw Workshop: Easy to master tips & techniques
  • Magazine, Woodsmith (Author)
  • English (Publication Language)
  • 98 Pages - 09/08/2020 (Publication Date) - Independently published (Publisher)
#9
Taunton's Complete Illustrated Guide to Tablesaws (Complete Illustrated Guides (Taunton))
  • Amazon Kindle Edition
  • Anthony, Paul (Author)
  • English (Publication Language)
  • 227 Pages - 04/30/2015 (Publication Date) - Taunton Press (Publisher)
#10
Rock Paper Scissors Table Saw Funny Carpenter Hoodie
  • Rock Paper Scissors Table Saw Funny Carpenter Hoodie is a great t-shirt gift idea for her, for him, for a friend, sister, brother, mom, dad, grandmother, grandfather or anyone special in your life who has birthday!
  • If its your birthday or someone who is having a birthday then this officially funny carpenter birthday hoodie for you.
  • 8.5 oz, Classic fit, Twill-taped neck

You may also like...